Jacuzzis Ireland
JACUZZIS IRELAND
Below see our full range of Jacuzzis all available to buy. If you have any questions about any of our jacuzzis Ireland feel free to contact us and we’ll get back to you as soon as possible.
- USA Balboa control system (Gecko system also available)
- USA Aristech acryl shell
- Spa cover
- Insulation foam on shell and skirt
- Stainless steel jets
- FRP bottom base
- Perimeter LED lighting
- Air jets and air blower
- Ozone injector and ozone mixer
- Automatic air escape system
- Standard step (except TubHub-5805N) and spa protection bag etc. (which are usually charged separately by other suppliers.)
JACUZZIS IRELAND FEATURES
A. Durable control system
Well-known and widely accepted reliable Balboa control system, TubHub-Spa-Balboa-Control-System
B. Excellent spa shell
Original American Aristech acrylic sheet. Various colours are available.
C. High-strength spa body
We use the vinyl ester resin as first layer of reinforcement on entire shell to avoid the blister problem. After that, we spray 6 layers of fiberglass for the reinforcement. The thickness of our spa body is around 8mm which is much stronger than the normal spas with only 3-4 layers reinforcement.
D. 100% no leaking plumbing
We fix the pipes with imported blue glue and then tighten with the S/S clamp. It has double security to avoid any minor leaking.
E. Nicely drilled holes for jets position
We fix the pipes with imported blue glue and then tighten with the S/S clamp. It has double security to avoid any minor leaking.
F. High-density heat-lock insulation
For each TubHub spa, the entire spa body is covered with 25mm high-dense polyurethane foam, the cabinet is covered with aluminum foil insulation and the bottom of the spa is sealed by a fibreglass reinforced plastic base (FRP). This spatial insulation can lock the heat in the spa extremely and create the most energy-saving spa.
G. Weather proof fibreglass reinforced plastic (FRP) base
For each TubHub spa, the entire spa body is covered with 25mm high-dense polyurethane foam, the cabinet is covered with aluminum foil insulation and the bottom of the spa is sealed by a fibreglass reinforced plastic base (FRP). This spatial insulation can lock the heat in the spa extremely and create the most energy-saving spa.
H. Exclusive draining system
Every TubHub spa has the bottom drain valve as standard and has the exclusive draining plumbing system: its pipe is approximately 15cm higher from the bottom and all the pipes are connected to the drain valve on the skirt. So more than 99% water inside the spa and pipes can be emptied when people want to dry the spa.
I. Strong ball valves for pumps
For each pump in a TubHub spa, it is equipped with strong ball valves both in front of pump and its back.
J. High-efficiency ozone injector and mixer
Our ozonizer is not connected to the jet directly as other spa manufacturers. The disinfection system is combined with the ozone generator, check valve, ozone injector, ozone mixer and anti-oxidative hose. There are two check valves to our ozonizer which can completely eradicate any possible back flow. And the ozone mixer can mix the ozone and water perfectly and get better disinfection effect.
K. Elegant LED around the spa
L. Elegant cable slot
Every TubHub spa’s cables are fixed inside the slot, which makes the spa look more elegant and the cables are protected properly.
M. Strong and nice packing
Every TubHub spa is protected by plastic film and the expandaple polyephylene (EPE), outside with the spa protecting bag as the standard package instead of carton which makes better outlook and protection to the spa. User can use this protecting bag afterwards!
N. Certificates:
All our spas are with CB/CE/SAA approval issued by SGS.